Porsche 996 TT, Repair Manual

Page: 1052 / 2099

and unclip.
9 Bracket 1 Press the locking tabs of the bracket −9−
together with pointed−nose pliers −inset
B−
and guide out of the lock support −5− .
Position bracket −9− on the lock
support −5− and clip into place.
Ensure that the locking tabs
engage properly.
10 Cover, rear
left
1 Unclip. Clip in.
11 Cover, rear
top
1 Unclip. Clip in.
12 Fastening
screws
4
13 Extension
bracket
1 Unscrew fastening screws −12− from the
extension bracket −13− and guide out of
the centre console towards the rear. Position the extension bracket
−13−
on the centre console and
secure with the fastening
screws−12− .
top of page
Disassembling and assembling cover for the oddments tray
No. Designation Qty. Removal Installation
1 Fastening screws 8
2 Cover, oddments
tray 1
3 Fastening screws 2
4 Retaining bracket 1 Undo the fastening screws −3− .
−Note:−
the retaining bracket is under
tension due to the spring −7− . Insert the retaining bracket −4− in to
the limiting band −8− .
Position together on the centre
console and secure with the
einordnung
Disassembling and assembling cover for the oddments tray 989