Porsche 996 TT, Repair Manual

Page: 1252 / 2099

15. Undo the upper fastening screw −right arrow− . Lift the intake pipe out of the shaft bolt −left arrow−
and remove towards the rear of the vehicle. Remove the seal.
16. Disconnect the activated carbon filter lead. To do so, disconnect the coupling −arrow− .
17. Pull off the connector −1− of the camshaft adjustment valve.
Note
With all fuel lines, always counter with a second open−ended wrench! •
18. Disconnect the fuel return line −2− (a/f 14 and 17). Unscrew the M6 screw in the holder −3− .
19. Disconnect the fuel supply line −4− (a/f 17 and 19).
20. Disconnect the fuel line −5− (a/f 17 and 19) to the fuel collection pipe, cylinder bank 4 − 6.
21. Unclip the cable duct on the fuel collection pipe and lay it as far as possible to the side.
einordnung
Removing injection valves of cylinder bank 1 3 1189