Porsche 996 TT, Repair Manual

Page: 1262 / 2099

47. Press the Y−shaped pressure pipe into the air cowl of the throttle body, connect the hoses −3 and 5−
and fasten the hose clamps. Connect the connector of the pressure sensor −4− and position and
tighten the M6 screws −1 and 2− .
Tightening torque of M6 screws = 10 Nm (7.5 ftlb.)
48. Install the holder over the air−conditioning compressor. Position and tighten the M6 screw in the holder
for this purpose.
Tightening torque of M6 screw = 10 Nm (7.5 ftlb.)
49. Connect hose to the Y−shaped pipe and fasten with the hose clamp −arrow− .
50. Install the connecting hoses between the charge air coolers and the Y−shaped pressure pipe; the
connecting hoses must engage audibly.
51. Install air cleaner housing => Removing and installing air cleaner.
52. Install rear spoiler ’ 63 55 19 Installing rear spoiler .
53. Connect the battery.
54. Read out the fault memory with the Porsche System Tester.
55. Enter radio code.
56. Perform a function test.
996420, 996421, 996450, 996451, 996620, 996621, 996650, 996651, 996840, 996841
einordnung
Installing injection valves 1199