Porsche 996 TT, Repair Manual

Page: 1528 / 2099

Standardising the system
Standardising the power windows
The system must be re−standardised after an interruption in the power supply to the power window
electronics in the door. The position values for the short−stroke lowering function, position−controlled
lowering function in the case of convertible top actuation and enabling for "automatic start−up of window
closing" (one−touch function) are redefined. The standardisation process is initiated by continuous actuation
of the operating button Raise window .
Hold down the button Raise window until the window is closed and is switched off by the blockage
detection function of the power windows.
Blockage detection function
Note
If the window drive encounters resistance during the door window movement, the motor is switched
off after a delay of 500 ms. •
Precondition for operation of the power windows
Ignition switched on.
•
Ignition key should not be removed from the steering lock with the ignition switched off. •
The door is opened for the first time after switching off the ignition. •
Door opened. •
top of page
Fitting the door window in the clamping jaws
1. Insert the door window through the door channel into the clamping jaws of the front and rear drivers.
2. Position the door window corner flush with the driver at front.
einordnung
Standardising the system 1465