Porsche 996 TT, Repair Manual

Page: 1220 / 2099

Press the double arrow key << , select the menu item Remote control and press the double arrow key
>> .
"Input key learning code" appears on the screen
10. With the arrow keys, input the key learning code and press the double arrow key >> .
The following message appears on the screen: "Please confirm input".
11. Check the input and press the F7 key to confirm the input.
12. Distinguish between loss and fault and additional hand−held transmitter for the radio code.
a) Teaching an additional hand−held transmitter:
Select the same position (1 to 4) as for the transponder key and press the [F8]
key.
b) Teaching in the case of a lost or faulty hand−held transmitter:
13. In this case, it is first necessary to identify and delete the stored "radio code" of the lost hand−held
transmitter.
The remaining hand−held transmitters are required for this purpose.
Press the locking button on the hand−held transmitter and then insert the vehicle key into the
ignition lock, switch on the ignition and re−establish communication with the control module.
Current radio key shows the "radio code" of the vehicle key that is presently inserted in the ignition lock.
Compare this radio code with the radio codes at positions 1 to 4.
This comparison allows the position of the lost hand−held transmitter (radio code) to be identified, as one
"radio code" is ultimately left over at positions 1 to 4.
Insert the vehicle key equipped with the new hand−held transmitter into the ignition lock and switch on
the ignition.
Establish communication with the control
module.
Select the identified position using the arrow keys and delete the radio code with the F3
key.
Then press the F8 key.
14. Carefully input the 24 digit code number with the arrow keys and press the double arrow key >> .
The following message appears on the screen: "Please confirm input".
15. Check the input and press the F7 key.
Now the handheld transmitter is taught.
16. Go back to the menu item Learning function, remove the key and switch on the ignition again.
Once the key has been removed again, the hand−held transmitter is ready for use.
17. Check handheld transmitter for operation.
996420, 996421, 996450, 996451, 996620, 996621, 996650, 996651, 996840, 996841
einordnung
Procedure 1157