Porsche 996 TT, Repair Manual

Page: 292 / 2099

14. Separating glass as far as P5
an. Release
spooling device.
ao. Position deflection roller in the lower left
corner.
ap. Press deflection roller with fastening intake firmly against the
glass.
aq. Fix fastening intake onto the glass by moving the actuating lever.
ar. Pass cutting thread over the deflection roller onto the spooling
device.
as. Separate glass by spooling the cutting thread on the spooling device as far as point −P5− .
Note
The fastening force can be increased by moistening the fastening intake. •
15. Removing glass
16. Pulling off surrounding section
at. Carefully detach the surrounding section from the
windscreen.
Note
If the surrounding section is removed from the windscreen undamaged, it can be re−used. •
Cutting power when removing glass with cutting thread
Note
The power for separating the glass is weaker when the cutting thread is deflected to its maximum
point. An angle greater than 90° should be avoided.
•
einordnung
Cutting power when removing glass with cutting thread 229