Porsche 996 TT, Repair Manual

Page: 2071 / 2099

All straightening work on the body in this area must have been completed before the damaged parts
are removed. •
No. Procedure Instructions
Placing vehicle on the
alignment bench Place the vehicle with the units mounted at the front onto the set of
straightening attachments and fasten it in position.
1 Separating the spot−welded
joint at the rear closing panel. Use a spotweld cutter to separate the connection between the inner
side members and the rear closing panel −A− on the left and right.
2 Separating the spot−welded
joint at the rear closing panel. Use the spotweld cutter to separate the connection between the side
section on the inside and the rear closing panel −B, C− .
3 Separating the spot−welded
joint on the engine mount at
top Separate the spot−welded joint between the engine mount at top
−D−
and the inner side member and the connection to the inner
side section −F− with the spot−weld cutter.
4 Separating the spot−welded
joint on the engine mount at
bottom Use the spotweld cutter to separate the spot−welded joint between
the engine mount at bottom −E− and the inner side member.
top of page
Inserting rear closing panel
einordnung
Inserting rear closing panel 2008