Porsche 996 TT, Repair Manual

Page: 1881 / 2099

Height adjusting nut 2.
Lock nut 3.
Stabilizer block 4.
Rear axle
Lock nut 1.
Height adjusting nut 2.
Lock nut 3.
Stabilizer block 4.
Note
The special tool 9647 is required together with a torque wrench in order to adjust the vehicle height!
Description under 911 GT2 suspension alignment in Repair Group 44. •
The stabilizer block is also adjusted for replacement dampers! •
top of page
Suspension alignment
The adjustment procedures and values on the front and rear axle differ in a number of respects from those of
the 911 Turbo (996).
Adjusting values in Repair Group 44.
The suspension alignment of the 911 GT2 is described after the suspension alignment of the 911 Turbo (996).
top of page
Wheel removal/installation
As the GT2 is equipped with PCCB (Porsche Ceramic Composite Brake), use assembly aids (assembly pins)
for wheel removal/installation, in order to exclude any possibility of heavy contact of the wheel with the brake
disc!
The assembly aids (2 assembly pins) are located in the luggage compartment!
einordnung
Adjustment operations on the spring struts 1818