Porsche 996 TT, Repair Manual

Page: 707 / 2099

top of page
Installing the three−phase generator
1. Fasten B+ lead and install three−phase generator.
2. The B+ lead must be fastened onto the long wiring arrangement −(arrow)− of the three−phase
generator (see Figure).
3. Install deflection roller and fit drive
belt.
Tightening torque of the hexagon nut M16 x 1.5: 65± 5 Nm (48 ± 3.5 ftlb)
Tightening torque of the hexagon−head bolts M10: 46 Nm (34 ftlb.)
Tightening torque of the M8 hexagon nut: 15 Nm (11 ftlb.)
Tightening torque of the deflection roller M10: 46 Nm (34 ftlb.)
4. Install air flow sensor with air cleaner assembly and connect
battery.
5. Perform a function test.
top of page
Undoing and tightening the belt pulley
Note
The belt pulley can be undone or tightened using a standard commercially available tool. •
Double offset ring wrench a/f 24 •
Screwdriver insert for internal serration screw a/f 10 •
Cross handle and torque wrench •
1. The hexagon nut a/f 24 must be countered with the ring wrench during
tightening.
2. The shaft is tightened to the prescribed tightening torque of 65 ± 5 Nm ( 48 ± 3.5 ftlb.) using the
screwdriver insert and the torque wrench.
top of page
Tool for holding the free−wheel pulley
Note
einordnung
Removing the three−phase generator 644