Porsche 996 TT, Repair Manual

Page: 1087 / 2099

No. Procedure Instructions
6 Removing the side
nozzles and the
temperature sensor Pull off the covering caps −20, 20A− . Undo the fastening screws −21− on
the side, remove the side nozzle −22− towards the front.
Unclip the temperature sensor −24− out of the instrument panel towards
the rear.
Disconnect the electrical plug connection −23− .
7 Removing left side
nozzles and main light
switch Pull forward the control button −25− of the light switch −31− as far as it
will go −direction of the arrow− towards the front. Press in the locking
device at the lower side using a small screwdriver and remove the control
button towards the front.
Undo the fastening screws −21− at the side, remove the side nozzle
towards the front. Disconnect the plug connection −30− of the main light
switch −31− .
In order to disassemble the side nozzle, the covering cap −28− , the
fastening nut −26− and the inner race −27− of the main light switch −31−
can be removed. Remove light switch −31− from the side nozzle by
einordnung
Disassembling the instrument panel 1024