Porsche 996 TT, Repair Manual

Page: 1722 / 2099

No. Procedure Instructions
1 Removing control module
and cover Lift both holders of the cover −1− in −direction of arrow A− and
remove to the front.
Unscrew the fastening screws −2− , position control module so
that the plastic clips −9− are exposed.
2 Removing switch for seat
adjustment Unscrew fastening screw −4− from the switch for the seat
adjustment −5− . Pull the switch upwards and pull to the front
−arrow−
. Subsequently remove through the opening of the
cushion carrier −direction of arrow− .
3 Disconnecting wiring
harness Disconnect electrical plug connection of the seat heating, unclip
the lines from the metal clips −6− along the seat rail.
3a Removing wiring harness Remove wiring harness −7− from the cushion carrier; to do so,
press the locking tabs −arrow− and pull out of the cushion
carrier.
4
einordnung
Removing front cushion carrier 1659