Porsche 996 TT, Repair Manual

Page: 1901 / 2099

Disassembling and assembling front spring strut GT2
No. Designation Qty. Removal Installation
1 Fastening nut
M 14 x 1 1 If necessary, pre−tension with the spring clamp
before loosening the fastening nut. This depends
on the adjustment (pre−tension) of the coil
spring. Support at the piston rod with a
countering tool Sonderwerkzeug 9630 or a 7 mm
Allen key when loosening the nut. Use new fastening nut.
Grease thread of the piston
rod with Optimoly HT
(copper paste). Tighten to
80 Nm (59 ftlb.)
2 Assembly of
spring strut
mount 1 Remove complete assembly (consisting of No. 8
/ No. 9 / No. 10 / No. 11). The spring strut mounts for
the right and left sides are
identical parts.
3 Spring mount 1
einordnung
Disassembling and assembling front spring strut GT2 1838