Porsche 996 TT, Repair Manual

Page: 1589 / 2099

The drive module is pressurised!
=> Safety instructions for the pump unit hydraulic system of the rear spoiler •
No. Procedure Instructions
3 Cutting tie wrap Cut tie wrap on the hydraulic line −5− using a pair of side cutters.
4 Disconnecting hydraulic
lines. Unscrew the short banjo bolts −1− from the hydraulic cylinders −2−
of the hydraulic lines −4, 5− . To do this, counter with an
open−ended wrench −C− .
Disconnecting hydraulic
lines from the pump unit => Removing pump
top of page
Filling the hydraulic cylinder
1. Filling the hydraulic cylinder
The hydraulic cylinder can only be filled in a retracted position.
a. Assemble hydraulic cylinder −2− vertically and fill with 5 ml Pentosin perhydraulic cylinder using a
syringe. => Tools and materials
Only Pentosin CHF 11 S may be filled into the hydraulic cylinder. Quantity supplied 1 litre container
=> Tools and materials
top of page
Installing hydraulic cylinder
einordnung
Filling the hydraulic cylinder 1526