Porsche 996 TT, Repair Manual

Page: 377 / 2099

Component exchange after airbag triggering
The following components must be removed and replaced after the airbag system is triggered:
After triggering of the airbag unit on the driver's side:
Contact unit •
Airbag unit, driver's side •
After triggering of the airbag unit on the passenger's side:
Airbag unit, passenger's side •
Triggering unit after the third time the airbag is triggered •
After triggering of the side airbag unit
Side airbag unit •
Sensor for the side airbag unit after the third time the side airbag is triggered •
After triggering of belt tensioner
After triggering of a belt tensioner, driver's and/or passenger's unit.
After triggering one or more air bag units (driver's, passenger's and/or side airbag).
All belt tensioner units •
Note
Because it is difficult to visually determine if one or both belt tensioners has been triggered, check the
following points.
•
Read out the airbag fault memory with the Porsche System Tester. •
Check plug connection on the belt tensioner for damage. •
Pull out the belt strap as far as possible and check for wear.
•
Perform a function test on the automatic belt device. •
996420, 996421, 996450, 996451, 996840, 996841
einordnung
Component exchange after airbag triggering 314