Porsche 996 TT, Repair Manual

Page: 1975 / 2099

46 16 24 Installing air ducts for PCCB brake discs −
GT2
Note
Installing front air ducts
Installing rear air ducts
Note
The air ducts (brake−air spoiler) on the front suspension of GT2 vehicles with PCCB brakes are larger
than those of a conventional brake system! Exclusively for PCCB brakes, air ducts (brake−air spoiler)
are also mounted on the rear suspension! •
These air ducts are not mounted during transport! •
CAUTION
Damaged, worn or missing aerodynamic components such as spoilers or underside panels affect the driving
behaviour and therefore must be replaced immediately!
Spoilers and undersides must therefore be regularly checked for damage! •
Please inform the customers concerned about this! •
top of page
Installing front air ducts
1. Mount the air duct (brake−air spoiler) on the front control arm (clip in similar to the standard air spoiler
on the Carrera 996 and Turbo 996). Then insert the expansion rivet (included in the scope of delivery) into
the bore present −arrow− . In vehicles with the model year 01, the bore −arrow− must also be drilled in
the wheel housing behind (8 mm, drill through from the existing bore).
2. Mount the air duct in the same manner on the other side of the vehicle.
top of page
46 16 24 Installing air ducts for PCCB brake discs − GT2 1912