Omron SYSDRIVE 3G3MV-A2001, User Manual

Page: 6 / 344

!
!
!
!
!
!
!
!
!
General Precautions
Observe the following precautions when using the SYSDRIVE Inverters and peripheral
devices.
This manual may include illustrations of the product with protective covers removed in order
to describe the components of the product in detail. Make sure that these protective covers
are on the product before use.
Consult your OMRON representative when using the product after a long period of storage.
WARNING
Do not touch the inside of the Inverter. Doing so may result in electrical shock.
WARNING
Operation, maintenance, or inspection must be performed after turning OFF the
power supply, confirming that the CHARGE indicator (or status indicators) are OFF,
and after waiting for the time specified on the front cover. Not doing so may result in
electrical shock.
WARNING
Do not damage, pull on, apply stress to, place heavy objects on, or pinch the cables.
Doing so may result in electrical shock.
WARNING
Do not touch the rotating parts of the motor under operation. Doing so may result in
injury.
WARNING
Do not modify the product. Doing so may result in injury or damage to the product.
Caution Do not store, install, or operate the product in the following places. Doing so may
result in electrical shock, fire or damage to the product.
S
Locations subject to direct sunlight.
S
Locations subject to temperatures or humidity outside the range specified in the
specifications.
S
Locations subject to condensation as the result of severe changes in temperature.
S
Locations subject to corrosive or flammable gases.
S
Locations subject to exposure to combustibles.
S
Locations subject to dust (especially iron dust) or salts.
S
Locations subject to exposure to water, oil, or chemicals.
S
Locations subject to shock or vibration.
Caution Do not touch the Inverter radiator, regenerative resistor, or Servomotor while the
power is being supplied or soon after the power is turned OFF. Doing so may result in
a skin burn due to the hot surface.
Caution Do not conduct a dielectric strength test on any part of the Inverter. Doing so may
result in damage to the product or malfunction.
Caution Take appropriate and sufficient countermeasures when installing systems in the fol-
lowing locations. Not doing so may result in equipment damage.
S
Locations subject to static electricity or other forms of noise.
S
Locations subject to strong electromagnetic fields and magnetic fields.
S
Locations subject to possible exposure to radioactivity.
S
Locations close to power supplies.