Omron SYSDRIVE 3G3MV-A2001, User Manual

Page: 121 / 344

5-19
H
Setting Frequency References 1 through 16 and the Inching Frequency
Command (n024 through n031, n120 through n127)
Frequency references 1 through 16 and an inching frequency command can be set together in the
Inverter (using registers n024 through n31, n120 through n127).
D
Setting Frequency References 1 through 16 (n024 through n31, n120 through n127)
n024
Frequency Reference 1 Register 0118 Hex Changes during
operation Yes
Setting
range 0.00 to max. frequency Unit of
setting 0.01 Hz
(See note
1.) Default setting 6.0
n025
Frequency Reference 2 Register 0119 Hex Changes during
operation Yes
Setting
range 0.00 to max. frequency Unit of
setting 0.01 Hz
(See note
1.) Default setting 0.00
n026
Frequency Reference 3 Register 011A Hex Changes during
operation Yes
Setting
range 0.00 to max. frequency Unit of
setting 0.01 Hz
(See note
1.) Default setting 0.00
n027
Frequency Reference 4 Register 011B Hex Changes during
operation Yes
Setting
range 0.00 to max. frequency Unit of
setting 0.01 Hz
(See note
1.) Default setting 0.00
n028
Frequency Reference 5 Register 011C Hex Changes during
operation Yes
Setting
range 0.00 to max. frequency Unit of
setting 0.01 Hz
(See note
1.) Default setting 0.00
n029
Frequency Reference 6 Register 011D Hex Changes during
operation Yes
Setting
range 0.00 to max. frequency Unit of
setting 0.01 Hz
(See note
1.) Default setting 0.00
n030
Frequency Reference 7 Register 011E Hex Changes during
operation Yes
Setting
range 0.00 to max. frequency Unit of
setting 0.01 Hz
(See note
1.) Default setting 0.00
n031
Frequency Reference 8 Register 011F Hex Changes during
operation Yes
Setting
range 0.00 to max. frequency Unit of
setting 0.01 Hz
(See note
1.) Default setting 0.00
Basic Operation
Chapter 5