Omron SYSDRIVE 3G3MV-A2001, User Manual

Page: 78 / 344

3-4
3-1-2 Outline of Operation
H
Selecting Indicators
Whenever the Mode Key is pressed, an indicator is lit in sequence beginning with the
FREF indicator. The data display indicates the item corresponding to the indicator
selected.
The FOUT or IOUT indicator will be lit by turning the Inverter ON again if the Inverter is
turned OFF while the FOUT or IOUT indicator is lit. The FREF indicator will be lit by turn-
ing the Inverter ON again if the Inverter is turned OFF while an indicator other than the
FOUR or IOUT indicator is lit.
Power On
FREF (Frequency Reference)
Monitors and sets the frequency reference.
FOUT (Output Frequency)
Monitors the output frequency.
Note This indicator will be lit by turning the Inverter ON again if
the Inverter is turned OFF while this indicator is lit.
IOUT (Output Current)
Monitors the output current.
Note This indicator will be lit by turning the Inverter ON again if
the Inverter is turned OFF while this indicator is lit.
MNTR (Multi-function Monitor)
Monitors the values set in U-01 through U-18.
F/R (Forward/Reverse Rotation)
Selects the direction of rotation.
LO/RE (Local/Remote)
Selects the operation of the Inverter through the Digital Operator or
according to the parameters.
PRGM (Parameter Setting)
Monitors or sets the values in n001 through n179.
The FREF indicator is lit again.
Note The setting unit of the frequency reference and output frequency is determined by the set value in
n035. The default unit is Hz.
Preparing for Operation and Monitoring Chapter 3