Omron SYSDRIVE 3G3MV-A2001, User Manual

Page: 218 / 344

7-28
Error
code
Remedy Probable cause Name
22 Hex Write mode error The Inverter in operation received a DSR
message to write data to a parameter that
prohibits any data to be written while the Inverter
is running. Write the data after
stopping the
Inverter.
The Enter command was received while the
Inverter is running.
The Inverter detecting UV received a DSR
message to write data.
Write the data after
restoring the UV
(main circuit
The Inverter detecting UV received the Enter
command.
(main circuit
undervoltage)
status.
The Inverter detecting F04 for an initialization
memory fault received a DSR message other
than that for parameter initialization (with n001
set to 8 or 9). Turn the Inverter
OFF and ON after
parameter
initialization with
n001 set to 8 or 9.
The Inverter processing data written received a
DSR message to write data. Wait for an elapse
period equivalent to
24 bits plus a
minimum of 10 ms to
issue the message
after a response is
received from the
Inverter.
A DSR message to a read-only register was
received. Check and correct
the register number.
Communications Chapter 7