English
Please refer to this manual together with the “ATAPI Interface Drive User’s Guide” in the attached Software
Disc, which carries more detailed information.
Français
Reportez-vous au présent manuel ainsi qu’au document intitulé “Lecteur d'interface ATAPI - Guide de
l’utilisateur” contenu sur le disque du logiciel accompagnant ce produit pour plus de détails.
Deutsch
Einzelheiten entnehmen Sie bitte diesem Handbuch sowie der “Laufwerk mit ATAPI-Schnittstelle -
Anwenderanleitung” auf der mitgelieferten Software-Disc.
Español
Consulte este manual junto con la “Unidad de interfaz ATAPI - Guía del usuario” del disco de software
suministrado, que contiene información más detallada.
Italiano
Fare riferimento al presente manuale insieme a “Guida dell’utilizzatore dell’unità disco con interfaccia ATAPI”
nel disco del software allegato, nel quale sono contenute informazioni più dettagliate.
Português
Consulte este manual juntamente com o “Guia do Utilizador do Drive de Interface ATAPI” incluído no disco
de software fornecido, para obter informações mais detalhadas.
Nederlands
Raadpleeg deze handleiding alsook de “ATAPI Station-interface -Gebruikershandleiding” op de bijgevoegde
Software Disc, die meer gedetaileerde informatie bevat.
Svenska
Förutom denna bruksanvisning finns mer information i “Brukanvisning för enhet med ATAPI gränssnitt” på
den medföljande programskivan.
A-BNH-100-12(1)
CRX230A
CD-RW Drive
Package Contents
Please verify that the package includes the following accessories with the drive when
unpacking.
If any of these items appears to be missing or damaged, please contact your supplier.
• CD-RW drive
• 40-pin ATAPI (IDE) flat cable
• Screws (
×
4)
• Product Information (this document)
• Software Quick Start Guide
• Quick Start Guide (for ATAPI (EIDE) Interface Drive)
• Software disc
• Warranty cards
Note
To guard against possible loss or damage, be sure to make a backup copy of the provided software disc on a CD-R
disc or other media. The software disc is not sold separately.
Please Record Responsibly
Before copying anything onto a CD-R or CD-RW disc, make sure that you are not violating
copyright laws. Most software companies allow you to make a backup or archive copy of
software. Check your software license agreement for details.
2003 Sony Corporation
Printed in China
P/N: 7819900503
This CD-RW drive can be used in systems
with the following capabilities.
❑
CPU: Pentium 266 MHz or higher
For stable writing performance at high
speeds, the CPU speed should be
considerably higher than the above
minimum requirement. For writing at
52
×
speed, a Pentium II/400 MHz or
higher is recommended.
❑
PC/AT-compatible PC
❑
OS:
Windows
®
98 Second Edition
Windows
®
2000 Professional
Windows
®
Millennium Edition
Windows
®
XP Home Edition
Windows
®
XP Professional
System Requirements
❑
At least 32 MB RAM (64 MB or higher
recommended)
❑
At least 1 GB available hard disk space
❑
One available EIDE (ATAPI) interface
connection with DMA capability
❑
One empty 5-inch half-height drive bay
❑
One available in12 V/+5 V power
connector
Notes
• The above system configuration is given as a
minimum requirement for a system on which basic
CD-RW writing performance can be obtained. In
actual use, the requirements for the writing software
and “Windows” also have to be taken into
consideration. (Normally, these requirements will be
higher than the above specifications.)
• The drive cannot be assured to operate properly if
connected to an ATAPI interface adapter card (we
cannot guarantee compatibility or offer user support).
Introduction
This product offers the following features.
❑
An internal CD-RW drive with ATAPI
(EIDE) interface for PCs.
❑
Writes up to 52
×
speed on CD-R disc
media.
❑
Writes up to 32
×
speed on CD-RW disc
media.
❑
Reads CD-ROM discs at up to 52
×
speed.
❑
With the Turbo Boost function, easily
switch from the default 40
×
read/write
speed to 52
×
speed.*
* For details, see “Turbo Boost Function” below.
❑
Features “Power-Burn conformed”
technology to prevent buffer under-run
errors.
“Power-Burn conformed” is used to refer to a
CD-R/RW that uses CD-R/RW recording
technology (ICs and/or firmware) other than
Power-Burn, but provides performance equivalent
to that of Sony original Power-Burn technology
based on the Power-Burn concept.
Notes
• Writing speed may automatically be adjusted
depending on the disc specified speed or disc
conditions such as weight imbalance and eccentricity.
• 1
×
and 2
×
writing speed and discs are not supported.
Product and Support Information
Sony Global Sites Information
Product purchased in the USA:*
http://sony.storagesupport.com/
Product purchased in Canada:
http://www.sony.ca/
Product purchased in Australia or New
Zealand:
http://www.sony.com.au/support.asp
Product purchased in Europe:*
http://www.sonydvd-link.com
Product purchased in Hong Kong:*
http://www.sony.com.hk/Electronics/cp
Product purchased in China:*
http://www.sony.com.cn/Electronics/edmh/
service.htm
Product Purchase in Singapore:
http://www.sony.com.sg/asianit/
Product purchased in Taiwan:*
http://www.sony.com.tw/stwn/cpd/index.htm
Product purchased in Korea:*
http://www.sony.co.kr/cp
Product purchased in Brazil:
http://www.sony.com.br/eletronicos
Product purchased in the Middle East:
http://www.sony-middleeast.com
* Local Web sites for computer peripheral products
About the Bundled Writing Software
Detailed information about the supplied
writing software is available on the Web
sites of the software manufacturers and
software distributors. (Accessible from the
links in each software application)
Technical Support
Please consult the above sources before
calling with questions about using this
product, or with technical questions about
the drive or the supplied software. If using
telephone or e-mail support, please have the
following information available:
• Model number: CRX230A
• Serial number
• Date and place of purchase
• Computer maker and model number
• Computer specifications (CPU speed,
memory size, OS version, etc.)
• Writing software used (version, etc.)
Local technical support service is
available only in the following
sales regions:
Product purchased in the USA
(Sony Electronics Inc.):
Monday to Saturday 8:00 a.m. - 8:00 p.m. CT
• Toll Free: 1-800-588-3847
• Free telephone support is offered for 90
days from your first call.
Product purchased in Canada
(Sony of Canada Limited):
24 hours / 7 days a week
• Toll Free: 1-800-961-7669
• http://www.sony.ca/sonyca/
customersupport_contactus.shtml
Product purchased in Australia or New
Zealand (Sony Australia Limited):
Monday to Friday 8:30 a.m. - 9:00 p.m. EST
• Toll Free: (Australia) 1300-13-7669
(NZ) 0800-7669-7895
• E-mail: [email protected]
Product purchased in Europe:
Monday to Friday
8:00 a.m. - 6:00 p.m. CET
(Except December 25
th
and January 1
st
)
• Austria
0179 567 397
• Belgium
027 173 220 / 027 173 221
• Denmark
70 112 107
• Finland
01080 6570
• France
0803 827962
• Germany
01805 987 986
• Greece
00800 4412 1175
• Ireland
01890925069
• Italy
848800977
• Luxembourg
034 208 083 60
• Netherlands
020 346 9404
• Norway
810 01 005
• Portugal
214 154 221
• Spain
901 120 105
• Sweden
0858 769 241
• Switzerland
084 424 6336 / 084 423 7337
• United Kingdom 0870 240 2410
• E-mail: [email protected]
Product purchased in Singapore
(Sony Electronics Singapore Pte. Ltd.):
Monday to Friday 9:00 a.m. - 5:00 p.m.
• Storage Support Hotline (not toll free):
+65-3291715
• E-mail: [email protected]
Safety Regulations
WARNING
You are cautioned that any changes or modifications not expressly approved in this document could void your
authority to operate this equipment.
To prevent fire or shock hazard, do not expose the unit to rain or moisture.
To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.
CAUTION:
As the laser beam in the CRX230A is harmful to the eyes, do not attempt to disassemble the cabinet. Refer
servicing to qualified personnel only.
The use of optical instruments with this product will increase eye hazard.
The use of controls or adjustments or performance of procedures other than those specified herein may result in
hazardous radiation exposure.
This label is located on the top of the drive unit enclosure.
Dieses Etikett befindet sich an der Oberseite des Laufwerksgehäuses.
The CD-RW drive is classified as a CLASS 1 LASER PRODUCT.
The CLASS 1 LASER PRODUCT label is located at the top of the enclosure.
Bei diesem CD-RW-Laufwerk handelt es sich um
ein Laser-Produkt der Klasse 1.
Das Etikett mit der Aufschrift LASER KLASSE 1
PRODUKT befindet sich auf der Oberseite des
Gehäuses.
FCC Compliance:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Note:
If you have any questions about this product, you may call the telephone number listed in the “Product and
Support Information” section. The telephone number below is not for customer service, but for official
purposes only.
Declaration of Conformity
Trade Name:
SONY
Model No.:
CRX230A
Responsible Party:
Sony Electronics Inc.
Address:
680 Kinderkamack Road, Oradell, NJ 07649 USA
Telephone No.:
201-930-6972
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operation.
CE Sicherheitsbestimmungen
Diese Ausrüstung erfüllt die Europäischen EMC-Bestimmungen für die Verwendung in folgender / folgenden
Umgebung(en):
• Wohngegenden
• Gewerbegebiete
• Leichtindustriegebiete
(Diese Ausrüstung erfüllt die Bestimmungen der Norm EN55022, Klasse B.)
• Power-Burn and
are trademarks of Sony Corporation.
• Pentium is a registrated trademark of Intel Corporation.
• Microsoft, MS, MS-DOS and Windows are registered trademarks of Microsoft Corporation.
• Other system and product names used herein are registered trademarks or trademarks of their respective
manufacturers, although the
TM
and ® marks are not used in the text.
Before using this device, be sure to read the end-user license agreements for the software provided with your
computer.
❑
Our product warranty is valid only when the supplied accessories (including software) are used in the
specified or recommended system environment, in accordance with the documentation, and applies
only to the CD-RW drive. Our customer service and user support apply only under these product
warranty conditions.
❑
Please note that we cannot accept responsibility for failure of the computer or other devices,
incompatibility with special hardware, operating problems caused by improper installation of software,
loss of data, discs or other accidental or incidental damage that might occur when using this product.
❑
The guarantee and user support for this product are valid only within the countries or sales regions
specified on the warranty card.
❑
Copyright laws prohibit the copying in part or in full of the supplied software and documentation, or
loaning the software, without obtaining permission of the copyright holder.
❑
We cannot accept responsibility for any direct or indirect financial damage or loss of profit that might
occur when using the supplied software.
❑
The supplied software can only be used with this product.
❑
Specifications of the supplied software may be changed without notice in the interest in product
improvement.
LUOKAN 1 LASERLAITE
KLASS 1 LASER APPARAT
CLASS 1
LASER PRODUCT
LASER KLASSE 1
PRODUKT
Compatible discs
CD-R
CD-RW
CD-ROM
CD-ROM XA
CD-DA
1)
CD Extra (CD+)
Video CD
CD TEXT
Photo CD
Disc diameter
12 cm
8 cm (reading only)
1)
This product is designed to playback discs that conform to the Compact
Disc (CD) standard. Recently, various music discs encoded with copyright
protection technologies are marketed by some record companies. Please
be aware that among those discs, there are some that do not conform to the
CD standard and may not be playable by this product.
When you use this unit as an audio CD player, please use compact discs
with the following mark.
Writing Systems
Track-at-once
Disc-at-once
Session-at-once
Packet writing
Drive
Data transfer rate
CD-ROM
Up to 7800 KB/s (52
×
speed)
2)
Access time
Average random stroke
CD-ROM
100 ms
2)
When using the Turbo Boost function.
The maximum data transfer rate depends on the
capabilities of the host PC.
Buffer under-run error protection
technology
Operating Environment
5 to 40 °C
Power and Miscellaneous
DC +5 V
1.5 A
DC +12 V
1.5 A
Size
Approx. 145.8
×
41.3
×
165 mm (W
×
H
×
D)
(excluding front bezel)
Weight
Approx. 0.9 kg (drive only)
Interface
Drive interface
ATAPI (EIDE)-compliant
Drive Inquiry
Vender Identification = “
SONY
”
Product Identification = “
CD-RW CRX230E
”
Buffer capacity
2 MB
Please note that specifications and
appearance may be subject to change
without notice.
Specifications
The default read/write speed of this drive is
40
×
speed. With a single touch, you can
activate the Turbo Boost function, making
the read/write speed 52
×
speed.
CAUTION
• On rare occasions, some discs may not be able to
tolerate 52
×
speed, causing them to break. We
recommend that you do not use deeply scratched,
brittle, or other discs that may break at 52
×
speed.
• The Turbo Boost function does not increase read/write
speed with CD-RW discs.
1
Insert a disc into the drive.
The speed when you insert a disc is
normally 40
×
speed.
Turbo Boost Function
2
Press the Eject button for five
seconds.
The Busy indicator blinks twice and the
speed switches to 52
×
speed. (The Turbo
Boost function is active.)
Notes
• When you want to write at 52
×
speed, insert the disc
into the drive, activate the Turbo Boost function, and
then start writing to the disc.
• When writing with the Turbo Boost function, the Busy
indicator blinks more rapidly than usual. (About twice
as fast as when writing at the default write speed.)
• When you open the disc tray, the speed reverts to its
default of 40
×
speed.
• The Turbo Boost function does not guarantee a 52
×
write speed. Depending on the condition of the disc
you are using, the speed may be lower.
Product Information
Included Documents
❑
Quick Start Guide
❑
Software Quick Start Guide
❑
Electronic manual on the software disc
❑
Warranty cards
❑
Product Information (this document)
