4 - 7
4 System Design
G5-series Linear Motors/Servo Drives With Built-in EtherCAT Communications
4-1 In
stalla
tion
Co
ndit
ion
s
4
4-
1-2 Ir
on-core
Linea
r Motor
Insta
llatio
n Conditio
ns
1
Fix the first Magnet Track unit with bolts.
2
Install the second Magnet Track unit.
Place the second Magnet Track unit in a place where no magnetic attraction force is exerted
with the first Magnet Track unit.
Slide the second Magnet Track unit while pushing it onto the mounting surface to prevent it from
coming off the surface.
At this time, a magnetic attraction force arises between the first and second Magnet Track units.
Be careful not to be injured. You may be caught between the motor parts.
Fix the second Magnet Track unit with bolts while pressing it against the first Magnet Track unit.
For third Magnet Track unit and later, follow the same procedure as for the second Magnet
Track unit.
Before you finish installing all the Magnet Track units, install the moving table.
The installed Magnet Track units are attracted each other by a magnetic attraction force.
If repelling, the Magnet Track units are installed in a wrong direction.
3
Install the Motor Coil Unit and the moving table.
Install the Motor Coil Unit and the moving table in a place where no magnetic attraction force is
exerted between the Motor Coil Unit and the Magnet Track.
Secure a work space at the end of the Linear Slider. If not possible, install dummy guides to
extend the Linear Slider.
Second unit
Magnetic
attraction force
First unit
Magnet Track
Magnet Track
Slide
Dummy guide
Moving table
Linear Slider
