9-12
9-4 Setting the Mode
OMNUC G5-SERIES AC SERVOMOTOR AND SERVO DRIVE USER'S MANUAL
9
Operation
Analog Input Value
Error Factor, History
Up to the most recent 14 alarms, including the current one, can be viewed in the reason of error.
The display area will flash when an alarm occurs.
If an alarm that is recorded in the history occurs, the alarm code for the current alarm and for
history 0 will be the same.
Analog input value 1 (V)
The value after offset compensation is displayed.
Analog input value 2 (V)
Analog input value 3 (V)
Input signal
Input voltage (V)
Note. Voltages exceeding
+
/
−
10 V are not displayed accurately.
Press to select the signal you want to monitor.
...Present error
...History 0 (latest history)
...History 13 (oldest history)
Error code
( if no alarm is present)