![background image](http://html1.mh-extra.com/html/omron/omnuc-g5/omnuc-g5_user-manual_742230460.webp)
9-29
9-4 Setting the Mode
OMNUC G5-SERIES AC SERVOMOTOR AND SERVO DRIVE USER'S MANUAL
9
Operation
Precautions for Correct Use
The absolute encoder reset function can be used only with systems that use an absolute encoder.
Parameter Initialization
This initializes the selected parameter.
1. Execute the initialization of the parameter.
2. Returning to AUXILIARY FUNCTION mode display
Precautions for Correct Use
If alarm display No. 11 (power supply undervoltage), 36 (parameter error) or 37 (parameter
destruction) is displayed, the parameter cannot be initialized.
Front Panel Lock
This locks the front panel.
1. Displaying PARAMETER mode
Key
operation
Display example
Explanation
Press the
key to enter PARAMETER INITIALIZATION
mode.
Press and hold the
key for 5 seconds or longer until
is displayed.
The bar indicator will increase.
The initialization of the selected parameter will start.
This indicates a normal completion.
will be displayed if the parameter could not be
initialized. Turn OFF the driver power supply and then execute
again.
Key
operation
Display example
Explanation
Press the
key to return to AUXILIARY FUNCTION mode.
Key
operation
Display example
Explanation
Press the
key to display MONITOR mode.
Press
key to display PARAMETER SETTING mode.