![background image](http://html.mh-extra.com/html/omron/omnuc-g5/omnuc-g5_user-manual_742230117.webp)
3-34
3-1 Driver Specifications
OMNUC G5-SERIES AC SERVOMOTOR AND SERVO DRIVE USER'S MANUAL
3
Specifications
Gain Switching (GSEL)
Pin 27: Gain switching (GSEL)
This is the allocation at default setting. You can change the logics and allocations for input
terminals (CN1 to 8, 9 and 26 to 33) according to the settings of Input Signal Selection 1 to 10
(Pn400 to 409).
Function
This signal changes to enable (set value: 2) according to the setting of GAIN SWITCHING
mode (Pn115 for position control, Pn120 for speed control, or Pn124 for torque control).
When the signal is OFF and ON, gain 1 and gain 2 change to enable, respectively.
Vibration Filter Switching 1 (DFSEL1) and Vibration Filter Switching 2 (DFSEL2)
Pin 26: Vibration filter switching 1 (DFSEL1)
No allocation: Vibration filter switching 2 (DFSEL2)
This is the allocation at default setting. You can change the logics and allocations for input
terminals (CN1 to 8, 9 and 26 to 33) according to the settings of Input Signal Selection 1 to 10
(Pn400 to 409).
Function
Use the sequence signal to switch among the 4 filters for use in damping control when the
setting of Vibration Filter Selection (Pn213) is enable (set value: 1 or 2).
Electronic Gear Switching 1 (GESEL1) and Electronic Gear Switching 2 (GESEL2)
Pin 28: Electronic gear switching 1 (GESEL1)
No allocation: Electronic gear switching 2 (GESEL2)
This is the allocation at default setting. You can change the logics and allocations for input
terminals (CN1 to 8, 9 and 26 to 33) according to the settings of Input Signal Selection 1 to 10
(Pn400 to 409).
Function
Use these 2 signals to switch among up to 4 electronic gear ratio numerators.
Electronic Gear Ratio Denominator (Pn010) is a common setting.
Pn213 set
value
DFSEL1
DFSEL2
Vibration
filter 1
Vibration
filter 2
Vibration
filter 3
Vibration
filter 4
1
OFF
−
Enabled
Enabled
ON
−
Enabled
Enabled
2
OFF
OFF
Enabled
ON
OFF
Enabled
OFF
ON
Enabled
ON
ON
Enabled
GESEL1
GESEL2
Electronic
Gear 1
Electronic
Gear 2
Electronic
Gear 3
Electronic
Gear 4
OFF
OFF
Pn009 valid
ON
OFF
Pn500 valid
OFF
ON
Pn501 valid
ON
ON
Pn502 valid