![background image](http://html.mh-extra.com/html/omron/omnuc-g5/omnuc-g5_user-manual_742230186.webp)
3-103
3-4 Cable and Connector Specifications
OMNUC G5-SERIES AC SERVOMOTOR AND SERVO DRIVE USER'S MANUAL
3
Specifications
Connector-terminal Block Conversion Unit
This can be used along with a connector-terminal block cable (XW2Z-xJ-B24) to convert the
driver's control I/O connector (CN1) to a terminal block.
XW2B-50G4 (M3 Screw Terminal Block)
Dimensions
Use 0.3 to 1.25 mm
2
wire (AWG22 to 16).
The wire inlet is 1.8 mm (height)
×
2.5 mm (width).
Strip the insulation from the end of the wire for 6 mm as shown below.
Flat cable connector (MIL type plug)
3.5
15.5
45
2-
φ
3.5
Terminal block
3.5
29.5
5.08
20.5
38.1
(45.3)
157.5
6 mm