StorageWorks by Compaq
AIT 35GB AutoLoader
Overview and Installation
NOTICE
© 2002 Compaq Information Technologies Group, L.P.
Compaq, the Compaq logo, and StorageWorks are trademarks of Compaq
Information Technologies Group, L.P.
All other product names mentioned herein may be trademarks of their
respective companies.
Compaq shall not be liable for technical or editorial errors or omissions
contained herein. The information is provided “as is” without warranty of
any kind and is subject to change without notice. The warranties for Compaq
products are set forth in the express limited warranty statements
accompanying such products. Nothing herein should be construed as
constituting an additional warranty.
Printed in the U.S.A.
StorageWorks by Compaq
AIT 35GB AutoLoader Rack Installation Instructions
First Edition (May 2002)
Part Number: 285248-001
Compaq Computer Corporation
Warnings and Cautions
WARNING:
Before you begin, make sure that the rack is sufficiently
stable. Lower the rack leveler feet (if provided) and make sure any
required stabilizers are installed. Extend the rack anti-tip device (if
provided). Failure to extend the anti-tip device could result in personal
injurty or damage to the tape AutoLoader if the rack tips over.
!
CAUTION:
Do not remove the top cover of the AutoLoader during the
installation process. Removing the top cover could result in damage to
the AutoLoader. It also causes the AutoLoader chassis to bow and
prevents correct installation.
CAUTION:
Make sure that the rack and all equipment mounted in the
rack have reliable ground connections. Verify that the total current of
the rack components does not exceed the current rating of the power
distribution unit or outlet receptacles.
CAUTION:
The AutoLoader is shipped with a transport screw in the
Shipping position (top hole). Do not operate the AutoLoader with the
transport screw in the top hole. Use a flat blade screwdriver to relocate
the trasport screw to the Operation position (bottom hole) before
operation.
Product Documentation
StorageWorks by Compaq
AIT 35GB AutoLoader
Reference Guide
This document provides information about the AIT
35GB AutoLoader, including system installation and
configuration, operation, maintenance and
troubleshooting instructions, and specifications.
StorageWorks by Compaq
AIT 35GB AutoLoader Rack
Mount Template
This template serves as a tool to quickly measure and
mark a rack for proper installation of a AIT 35GB
AutoLoader.
StorageWorks by Compaq
AIT Documentation CD
CD containing electronic versions of all AIT product
documentation in English, French, Italian, German,
Spanish, Danish, and
Japanese.
Compaq World Wide
Warranty Statement
This document contains information about the
warranty for your AutoLoader.
Compaq World Wide
Telephone Booklet
This document contains contact information for world
wide Compaq resources.
Important Safety
Information Booklet
This document contains information about common
sense precautions necessary when working with
equipment powered at wall receptacle service levels.
StorageWorks by Compaq
AIT 35GB AutoLoader
Overview and Installation
This document contains product overview
information and quick installation instructions
for experienced installers.
CAUTION:
To prevent damage to the the tapes and the tape drives,
position the AutoLoader so that no cooling vents are located directly in
front of the unit; this helps minimize the amount of foreign debris
entering the tape path.
285248- 001
