NXP Semiconductors LCP43 Series, User Manual

Page: 251 / 1269

UM10503 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2012. All rights reserved.
User manual Rev. 1.3 — 6 July 2012 251 of 1269
NXP Semiconductors
UM10503
Chapter 14: LPC43xx Pin configuration
P6_12 G15 F13 145
[3]
N;
PU I/O GPIO2[8] — General purpose digital input/output pin.
O CTOUT_7 — SCT output 7. Match output 3 of timer 1.
- R — Function reserved.
O EMC_DQMOUT0 — Data mask 0 used with SDRAM and static
devices.
- R — Function reserved.
- R — Function reserved.
- R — Function reserved.
- R — Function reserved.
P7_0 B16 B14 158
[3]
N;
PU I/O GPIO3[8] — General purpose digital input/output pin.
O CTOUT_14 — SCT output 14. Match output 2 of timer 3.
- R — Function reserved.
O LCD_LE — Line end signal.
- R — Function reserved.
- R — Function reserved.
- R — Function reserved.
I/O SGPIO4 — General purpose digital input/output pin.
P7_1 C14 C13 162
[3]
N;
PU I/O GPIO3[9] — General purpose digital input/output pin.
O CTOUT_15 — SCT output 15. Match output 3 of timer 3.
I/O I2S0_TX_WS — Transmit Word Select. It is driven by the master and
received by the slave. Corresponds to the signal WS in the I
2
S-bus
specification .
O LCD_VD19 — LCD data.
O LCD_VD7 — LCD data.
- R — Function reserved.
O U2_TXD — Transmitter output for USART2.
I/O SGPIO5 — General purpose digital input/output pin.
P7_2 A16 A14 165
[3]
N;
PU I/O GPIO3[10] — General purpose digital input/output pin.
I CTIN_4 — SCT input 4. Capture input 2 of timer 1.
I/O I2S0_TX_SDA — I2S transmit data. It is driven by the transmitter
and read by the receiver. Corresponds to the signal SD in the I
2
S-bus
specification .
O LCD_VD18 — LCD data.
O LCD_VD6 — LCD data.
- R — Function reserved.
I U2_RXD — Receiver input for USART2.
I/O SGPIO6 — General purpose digital input/output pin.
Table 130. LPC4357/53 Pin description
…continued
Pin name
L
B
GA
256
TFBGA18
0
LQ
FP2
0
8
Re
set st
ate
[2
]
Ty
p
e
Description