NXP Semiconductors LCP43 Series, User Manual

Page: 241 / 1269

UM10503 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2012. All rights reserved.
User manual Rev. 1.3 — 6 July 2012 241 of 1269
NXP Semiconductors
UM10503
Chapter 14: LPC43xx Pin configuration
P3_3 B14 B13 169
[5]
N;
PU - R — Function reserved.
I/O SPI_SCK — Serial clock for SPI.
I/O SSP0_SCK — Serial clock for SSP0.
O SPIFI_SCK — Serial clock for SPIFI.
O CGU_OUT1 — CGU spare clock output 1.
- R — Function reserved.
O I2S0_TX_MCLK — I2S transmit master clock.
I/O I2S1_TX_SCK — Transmit Clock. It is driven by the master and
received by the slave. Corresponds to the signal SCK in the I
2
S-bus
specification.
P3_4 A15 C14 171
[3]
N;
PU I/O GPIO1[14] — General purpose digital input/output pin.
- R — Function reserved.
- R — Function reserved.
I/O SPIFI_SIO3 — I/O lane 3 for SPIFI.
O U1_TXD — Transmitter output for UART 1.
I/O I2S0_TX_WS — Transmit Word Select. It is driven by the master and
received by the slave. Corresponds to the signal WS in the I
2
S-bus
specification .
I/O I2S1_RX_SDA — I2S1 Receive data. It is driven by the transmitter
and read by the receiver. Corresponds to the signal SD in the I
2
S-bus
specification .
O LCD_VD13 — LCD data.
P3_5 C12 C11 173
[3]
N;
PU I/O GPIO1[15] — General purpose digital input/output pin.
- R — Function reserved.
- R — Function reserved.
I/O SPIFI_SIO2 — I/O lane 2 for SPIFI.
I U1_RXD — Receiver input for UART 1.
I/O I2S0_TX_SDA — I2S transmit data. It is driven by the transmitter
and read by the receiver. Corresponds to the signal SD in the I
2
S-bus
specification .
I/O I2S1_RX_WS — Receive Word Select. It is driven by the master and
received by the slave. Corresponds to the signal WS in the I
2
S-bus
specification .
O LCD_VD12 — LCD data.
Table 130. LPC4357/53 Pin description
…continued
Pin name
L
B
GA
256
TFBGA18
0
LQ
FP2
0
8
Re
set st
ate
[2
]
Ty
p
e
Description