NXP Semiconductors LCP43 Series, User Manual

Page: 203 / 1269

UM10503 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2012. All rights reserved.
User manual Rev. 1.3 — 6 July 2012 203 of 1269
NXP Semiconductors
UM10503
Chapter 14: LPC43xx Pin configuration
P8_4 J2 H2 - 39 -
[3]
N;
PU I/O GPIO4[4] — General purpose digital input/output pin.
I/O USB1_ULPI_D1 — ULPI link bidirectional data line 1.
- R — Function reserved.
O LCD_VD7 — LCD data.
O LCD_VD16 — LCD data.
- R — Function reserved.
- R — Function reserved.
I T0_CAP0 — Capture input 0 of timer 0.
P8_5 J1 H1 - 40 -
[3]
N;
PU I/O GPIO4[5] — General purpose digital input/output pin.
I/O USB1_ULPI_D0 — ULPI link bidirectional data line 0.
- R — Function reserved.
O LCD_VD6 — LCD data.
O LCD_VD8 — LCD data.
- R — Function reserved.
- R — Function reserved.
I T0_CAP1 — Capture input 1 of timer 0.
P8_6 K3 J3 - 43 -
[3]
N;
PU I/O GPIO4[6] — General purpose digital input/output pin.
I USB1_ULPI_NXT — ULPI link NXT signal. Data flow
control signal from the PHY.
- R — Function reserved.
O LCD_VD5 — LCD data.
O LCD_LP — Line synchronization pulse (STN). Horizontal
synchronization pulse (TFT).
- R — Function reserved.
- R — Function reserved.
I T0_CAP2 — Capture input 2 of timer 0.
P8_7 K1 J1 - 45 -
[3]
N;
PU I/O GPIO4[7] — General purpose digital input/output pin.
O USB1_ULPI_STP — ULPI link STP signal. Asserted to
end or interrupt transfers to the PHY.
- R — Function reserved.
O LCD_VD4 — LCD data.
O LCD_PWR — LCD panel power enable.
- R — Function reserved.
- R — Function reserved.
I T0_CAP3 — Capture input 3 of timer 0.
Table 129. Pin description
…continued
LCD, Ethernet, USB0, and USB1 functions are not available on all parts.
Symbol
LB
GA25
6
TFBGA180 TFBGA100 LQ
FP2
08
[1
]
LQ
FP1
44
R
e
se
t st
ate
[2
]
Ty
p
e
Description