Procedure 6-3.6: Initial software generic installation
via FTP (2.0 boot code)
Procedure 6-3.7: Initial software generic installation
via FTP (1.0 boot code)
Procedure 6-3.9: Log in serially and enable FTP
and/or OSI on the LAN port
Procedure 6-4: Replace Combination circuit pack
Procedure 6-5: Replace Ethernet circuit pack
Procedure 6-6: Apply software generic
Procedure 6-7: Software generic copy and upgrade to
a remote shelf
Procedure 6-8: Backup and restore NE database via
FTP
Procedure 6-8.1: Backup NE database via FTP
Procedure 6-8.2: Provision automatic database backup
schedule via FTP
Procedure 6-8.3: Restore NE database via FTP
Procedure 6-9: Backup and restore NE database via
FTTD
Procedure 6-9.1: Backup NE database via FTTD
Procedure 6-9.2: Provision automatic database backup
schedule via FTTD
Procedure 6-9.3: Restore NE database via FTTD
Procedure 6-10: Backup and restore NE database via
FTAM
Procedure 6-10.1: Backup NE database via FTAM
Procedure 6-10.2: Restore NE database via FTAM
Procedure 6-11: Observe FTP progress
Procedure 6-12: Disable an FTP server
Procedure 6-13: Establish communications with
network element
Procedure 6-14: Replace pluggable transmission
module
Overview
Supporting procedures
....................................................................................................................................................................................................................................
6 - 2
Lucent Technologies
365-372-333 R2.1
Issue 4, June 2005