reset of the shelf and the automatic apply/activation of the
downloaded software (
apply
), takes approximately 10 minutes.
After
INS-PRGM
completes and the dormant generic is applied, the
SYSCTL LEDs cycle through the following transitions while the
SYSCTL resets.
•
MN/ABN
LED extinguishes
•
MN/ABN
LED and
ACO/TST
LED simultaneously light for
approximately 12 seconds and then extinguish
•
MN/ABN
LED and
ACO/TST
LED simultaneously light for
approximately 8 seconds and then extinguish
•
CR/MJ
LED flashes eleven times
•
All LEDs remain extinguished; the reset is complete.
............................................................................................................................................................
8
Exit the Term program using
ALT
+
F2
. Continue with
............................................................................................................................................................
9
Important! Do NOT insert a new circuit pack in the shelf until
after you apply the new software generic and clear the
dormant/exec version mismatch
condition.
Procedure 6-3.8: Initial software generic
installation or download and upgrade via a
serial connection
Supporting procedures
....................................................................................................................................................................................................................................
365-372-333 R2.1
Issue 4, June 2005
Lucent Technologies
6 - 1 3 1