Click
OK
.
Important! While the SYSCTL is in the factory-fresh state, user
ID/password provisioning is NOT uploaded from the OC-N Main
OLIUs. Therefore, you must log in to a factory-fresh SYSCTL
using the defaults listed above. After the generic is downloaded
and applied, and the NE resets, all previously provisioned user
IDs/passwords are restored and must be used to log in to the NE.
Result:
The following window appears. The boot code of
your SYSCTL appears in the title bar after Metropolis(R)
DMXplore. The figure below indicates that the SYSCTL has
2.1 boot code. Your boot code may be different.
Procedure 6-3: Replace a SYSCTL
(VLNC1) circuit pack
Supporting procedures
....................................................................................................................................................................................................................................
365-372-333 R2.1
Issue 4, June 2005
Lucent Technologies
6 - 4 3