............................................................................................................................................................
5
Select the connection from the
Profile
pull-down menu and then
proceed to
. OR Enter information for a new profile as follows:
1.
In the
Server
panel, select
IP
and enter the address of the FTP
server. (If the WaveStar
®
CIT is the FTP server, use your PC’s
IP address which can be determined by entering
ipconfig
from
the
MS DOS
prompt on your PC.)
2.
If necessary, enter the
port
(default is blank). Defining the port is
not required for the restore to execute successfully. However, a
value of 21 is valid if entered.
3.
In the
User
panel, enter the user name and password for the FTP
server. (If you are using the WaveStar
®
CIT as your FTP server,
the default user name/password for the WaveStar
®
CIT is
LUC01
/
LUC+01
, however your user name/password may be
different.)
............................................................................................................................................................
6
If you entered connection information in
and wish to keep the
information for future restores:
1.
Enter a new name in the
Profile
menu.
2.
Click
Add
to add the profile to the list.
3.
Click
Save
to save the list.
Important! Entries to the
Profile
pull-down menu may be
changed using the
Modify
,
Apply,
and
Save
buttons or removed
using the
Delete
button.
............................................................................................................................................................
7
In the
Source/Destination Directory Path
panel, enter the location
where the database information is stored. Enter the path and filename
exactly as it was entered in
“Procedure 6-9.1: Backup NE database
or
“Procedure 6-9.2: Provision automatic database
backup schedule via FTTD” (6-183)
(for example,
backups/<subdirectory>/<filename>
).
You may also click the
Browse
button next to the Path: field to
browse to any directory on your PC and select the required file. The
Browse
button is not available (greyed out) if the FTP server is not
the local WaveStar
®
CIT.
Important! The value of the Path field can be either an absolute
path or a relative path that is relative to the FTP server root
Procedure 6-9.3: Restore NE database via
FTTD
Supporting procedures
....................................................................................................................................................................................................................................
6 - 1 9 0
Lucent Technologies
365-372-333 R2.1
Issue 4, June 2005