............................................................................................................................................................
9
An NE Login window (
) appears:
Enter a valid User ID and password to log in to the NE.
This example uses the default User ID and Password. Enter the
appropriate User ID and Password if the defaults have been changed.
By selecting the
Enable these as the default values
checkbox, you
will be able to reconnect to this NE without entering the User ID and
Password. However, if you attempt to connect to a different NE that
does not have the same User ID and password, the connection will
fail and you will be prompted to enter a valid User ID and password.
The User ID and Password are stored for the duration of the CIT
session and must be re-entered when the CIT is restarted.
Important! LUC01, LUC02, and LUC03 are the default
privileged user IDs and DMXPLR2.5G is the default privileged
password for Metropolis
®
DMXplore. It is highly recommended
that you change all three user IDs and passwords during your
first session to preserve the security of your equipment. (To
change your network element password, refer to the Metropolis
®
DMXplore Access Multiplexer User Operations Guide,
365-372-332.)
Figure 6-5 NE login
Procedure 6-2: Connect personal computer
(PC) and establish WaveStar
®
CIT session
Supporting procedures
....................................................................................................................................................................................................................................
365-372-333 R2.1
Issue 4, June 2005
Lucent Technologies
6 - 3 1