Lucent Technologies Metropolis DMXplore, Alarm Messages And Trouble Clearing Manual

Page: 374 / 608

............................................................................................................................................................
7
In the
Connection Type
: field, click on the drop-down arrow and
select the appropriate connection type.
•
Serial should be selected if you are connected locally to the
serial
RS232
port on the SYSCTL circuit pack. To establish a
WaveStar
®
CIT session to a remote network element, you must
have DCC connectivity. Also refer to the WaveStar
®
CIT CIT
OSI Neighbors view and Address List. See the information in
“Before you begin” (6-24) .
•
OSI should be selected if
– you are connected locally to the
LAN
port on the SYSCTL
circuit pack, AND
– the
LAN
port is provisioned to use OSI protocol
To establish a WaveStar
®
CIT session to a remote network
element, you must have DCC connectivity. Also refer to the
WaveStar
®
CIT CIT OSI Neighbors view and Address List. See
the information in “Before you begin” (6-24) .
•
TCP/IP should be selected if
– you are connected locally to the
LAN
port on the SYSCTL
circuit pack, AND
– the
LAN
port is provisioned to use TCP/IP protocol, AND
– you know the IP address of the NE
To establish a WaveStar
®
CIT session to a remote network
element, you must have network connectivity and the IP address
of the remote network element or gateway network element.
............................................................................................................................................................
8
After completing the three fields, click on the Graphical button.
If you select the TCP/IP option, you must also enter the IP address of
your NE and then click
OK .
Important! All procedures in this manual assume that the
Graphical button is used. However, the
TL1 button can be
selected to communicate directly with the network element using
the TL1 Cut Through or Command Builder interface.
Procedure 6-2: Connect personal computer
(PC) and establish WaveStar
®
CIT session
Supporting procedures
....................................................................................................................................................................................................................................
6 - 3 0 Lucent Technologies 365-372-333 R2.1
Issue 4, June 2005