Lucent Technologies Metropolis DMXplore, Alarm Messages And Trouble Clearing Manual

Page: 442 / 608

If you need to enter information for a new profile:
1. In the Server panel, select IP and enter the address of the FTP
server. (If the WaveStar
®
CIT is the FTP server, you can
determine its IP address by entering
ipconfig
from the
MS DOS
prompt on your PC.)
The IP addresses of your FTP server and the LAN port you
provisioned on Screen 2 must be in the same subnet.
2. If necessary, enter the name (default is blank) of the FTP Server.
Defining the name is not required for the download to execute
successfully.
3. If necessary, enter the port (default is blank). Defining the port is
not required for the download to execute successfully. However,
a value of 21 is valid if entered.
4. In the
User
panel, enter the user name and password for the FTP
server. (If you are using the WaveStar
®
CIT as your FTP server,
the default user name/password for the WaveStar
®
CIT is
LUC01
/
LUC+01
, however your user ID/password may be different.)
5. If you entered connection information and wish to keep the
information for future downloads:
a. Type a new name in the Profile menu.
b. Click
Add
to add the profile to the list.
c. Click Save to save the list.
6. In the
Directory Path
panel, enter the current location of the
generic to be downloaded in the Path field.
The value of the Path field can be either an absolute path or a
relative path that is relative to the FTP server root directory. The
absolute path must start with the drive name followed by a colon
(:) then the path names; for example:
C:/Program Files/Lucent
Technologies/WaveStar CIT/generics/dmxplore/2.1.0/p
.
The syntax of the relative path must start with the path name; for
example:
/generics/dmxplore/2.1.0/p/
. (If necessary, replace
2.1.0 with your current release, for example 2.1.1.)
If you are using the WaveStar
®
CIT as your FTP server, the
WaveStar
®
CIT fills in the beginning of the default path
(C:/Program Files/Lucent Technologies/WaveStar CIT/).
If the FTP server is not the WaveStar
®
CIT, then enter the path
starting at the FTP home directory on the server.
7. Click Next .
Procedure 6-3.5: Initial software generic
installation via FTP (2.1 boot code) Supporting procedures
....................................................................................................................................................................................................................................
6 - 9 8 Lucent Technologies 365-372-333 R2.1
Issue 4, June 2005