followed by a colon (:) then the path names; for example:
C:\temp\today\backup. The syntax of the relative path must start
with the path name; for example: \temp\backup.
The WaveStar
®
CIT directory automatically enters the relative
path for the WaveStar
®
CIT. The default relative path is
C:/Program Files/Lucent Technologies/WaveStar CIT/
If you wish to store your data in a subdirectory within the default
path, you may enter
backups/<subdirectory>/<filename>
if
the subdirectory exists before the command is sent. Directories
will not be created by this command, and therefore the command
will be denied if any directory in the path does not already exist.
............................................................................................................................................................
7
From the
Type:
menu in the
Backup Type
panel, select
Forced
from
the pull-down menu. NOTE: No other options are available at this
time.
............................................................................................................................................................
8
From the
Files:
menu in the
Number Of Files
panel, select a number
from 1 to 9 (default is 2) from the pull-down menu, which indicates
the number of backup files to be stored automatically before the files
begin to overwrite.
Once established, the filename that you supplied in
will
initially be appended with “1” (FILENAME1). In subsequent backups,
the “1” will increase by one until the number selected in this step is
reached; then the files will begin overwriting beginning with
FILENAME1.
............................................................................................................................................................
9
Select the
Schedule
tab at the top of the window.
............................................................................................................................................................
10
From the
Days
menu in the
Update Interval
panel, select a number
from 1 to 99 (default is 30), which indicates the number of days
between automatic backups. The number may be selected by sliding
the arrow over the scale until the desired number appears in the field,
or by typing the number directly into the field.
Important! Setting this field to “0” cancels automatic backup.
Procedure 6-8.2: Provision automatic
database backup schedule via FTP
Supporting procedures
....................................................................................................................................................................................................................................
365-372-333 R2.1
Issue 4, June 2005
Lucent Technologies
6 - 1 7 1