General safety
requirements
In order to keep the technically unavoidable residual risk to a
minimum, it is imperative to observe the following rules.
•
Transport, storage and operation of the unit/system must be under
the permissible conditions only.
See accompanying documentation and information on the
unit/system.
•
Installation, configuration, and disassembly must be carried out
only by expert personnel and with reference to the respective
documentation.
Due to the complexity of the unit/system, the personnel require
special training.
•
The unit/system must be operated by expert and authorized users
only.
The user must operate the unit/system only after having read and
understood the chapter on safety and the parts of the
documentation relevant to operation. For complex systems,
additional training is recommended. Any obligatory training for
operating and service personnel must be carried out and
documented.
•
The unit/system must not be operated unless it is in perfect
working order.
Any faults and errors that might affect safety must be reported
immediately by the user to a person in responsibility.
•
The unit/system must be operated only with the connections and
under the environmental conditions as described in the
documentation.
•
Any conversions or changes to the system or parts of the system
(including the software) must be carried out by qualified Lucent
Technologies personnel or by expert personnel authorized by
Lucent Technologies.
All changes carried out by other persons lead to a complete
exemption from liability.
No components/spare parts must be used other than those
recommended by the manufacturer and those listed in the
procurement documents.
General notes on safety
Safety
....................................................................................................................................................................................................................................
365-372-333 R2.1
Issue 4, June 2005
Lucent Technologies
1 - 5