Lucent Technologies Metropolis DMXplore, Alarm Messages And Trouble Clearing Manual

Page: 511 / 608

Procedure 6-8.1: Backup NE database via FTP
....................................................................................................................................................................................................................................
Overview
Use this procedure to backup the NE database via FTP.
Important! You must have direct TCP/IP connectivity to your
NE and the NE must have a defined IP address.
Procedure Complete the following steps to backup the NE database via FTP.
............................................................................................................................................................
1
From the System View menu, select
Configuration
→
Software
→
Remote Backup .
............................................................................................................................................................
2
In the pull-down
Backup To/Via:
menu, select
FTP
.
............................................................................................................................................................
3 Select a connection profile from the Profile pull-down menu and
proceed to Step 5 . OR Enter information for a new profile as follows:
1. In the Server panel, select IP and enter the address of the FTP
server. (If the WaveStar
®
CIT is the FTP server, you can
determine its IP address by entering
ipconfig
from the
MS DOS
prompt on your PC.)
2. If necessary, enter the
port
(default is blank). Defining the port is
not required for the backup to execute successfully. However, a
value of 21 is valid if entered.
3. In the User panel, enter the user name and password for the FTP
server. (If you are using the WaveStar
®
CIT as your FTP server,
the default user name/password for the WaveStar
®
CIT is
LUC01
/
LUC+01
, however your user name/password may be
different.)
............................................................................................................................................................
4
If you entered connection information in Step 3 and wish to keep the
information for future backups:
1. Enter a new name in the Profile menu.
2. Click
Add
to add the profile to the list.
3. Click Save to save the list.
Entries to the Profile pull-down menu may be changed using the
Modify
,
Apply
, and
Save
buttons or removed using the
Delete
button.
Supporting procedures
....................................................................................................................................................................................................................................
365-372-333 R2.1
Issue 4, June 2005 Lucent Technologies 6 - 1 6 7