cassette shutter door is now open and ready for cleaning the
connector.
............................................................................................................................................................
3
Insert and press the connector ferrule endface perpendicular against
the cleaning cloth in the first of two slots of the cleaner.
Drag it down (in the direction indicated by the arrows on the cleaner).
Make certain not to release the lever of the cassette.
............................................................................................................................................................
4
Lift the connector from the first slot and rotate it 90 degrees and
repeat the downward motion using the second slot. Be sure the ferrule
is pressed snug against the cleaning cloth while dragging the ferrule to
assure the proper cleaning action.
Procedure 6-15.1: Clean optical fibers
Supporting procedures
....................................................................................................................................................................................................................................
6 - 2 1 8
Lucent Technologies
365-372-333 R2.1
Issue 4, June 2005