—
—
LCD
—
—
VFD V & Hz readings.
Record MAX/MIN regular readings.
Display Hold Function.
Backlight Display
GENERAL SPECIFICATIONS :
í
í
í
í
í
í
í
í
í
í
í
í
í
í
í
í
í
í
í
í
Sensing :
AC, True RMS
Display :
3-5/6 digits 6000 Counts Backlight LCD Display.
61 Segments Bar Graph :
40 per second max.
I
Auto Power Off.
Polarity :
Automatic
Update Rate :
5 per second nominal
Operating Temperature :
-10ºC ~ 50ºC
Relative Humidity :
Maximum relative humidity 90% for temperature
up to 28ºC decreasing linearly to 50% relative humidity at 50ºC.
Pollution degree :
2
P Rating :
IP40
Storage Temperature :
-20ºC ~ 60ºC, < 80% R.H. (with battery removed)
Altitude :
Operating below 2000m
Temperature Coefficient :
Nominal 0.1 x (specified accuracy)/ °C @(-10ºC~18ºC or 28ºC~50ºC),
or otherwise specified.
Low Battery:
approx. 4.6V
APO Timing:
Idle for 20 minutes
APO Consumption:
20
m
A typical
Power Supply:
Four Alkaline AA batteries
+Hz
Power Consumption:
6.5mA typical except the followings : VFD ACV
: 8mA
Insulation Resistance @ 1mA Test Current :
50V output Voltage : 25mA, 100V output Voltage : 45mA
250V output Voltage : 85mA, 500V output Voltage : 170mA
1000V output Voltage : 440mA
Tester can perform at least 950 Insulation Tests with new alkaline batteries at room temperature.
These are standard tests of 1000V into 1M
W
with a duty cycle of 5 seconds on and 25 seconds off.
Dimension:
208(L) X 103(W) X 64.5(H) mm with holster
Weight:
635 gm with holster.
TRUE RMS DIGITAL INSULATION MULTIMETER
MODEL KM 887
Preliminary Data
D:/Chhaya/My Documents/Chhaya/backup/catlogs/NEW CAT/2015 new arrival catalogs/KM887.cdr
An ISO 9001:2008 Company
®
®
SPECIAL FEATURES :
All Specifications are subject to change without prior notice
NEW
—
Dual
—
—
—
—
DHz readings.
Relative zero mode.
LOCK-Test mode for Insulation Resistance
BeepJack audible & visible input warning.
High resolution 60.00mV & 60.00
W
ranges.
TM
SAFETY :
í
í
í
í
í
Safety :
Double insulation per IEC / UL / EN61010-1 Ed. 3.0, IEC / UL / EN61010-2-030 Ed. 1.0, IEC / UL / EN61010-2-033 Ed. 1.0,
IEC / UL / EN61010-031 Ed. 1.1 & the corresponding CAN / CSA-C22.2 regulations to Measurement CAT III 1000V AC & DC & CAT IV 600V AC & DC.
Compliance to IEC / EN61557:2007 :
(per CE requirements, not certified by UL or ETL) : IEC / EN61557-1 & IEC / EN61557-2 .
Overload Protections :
Insulation Resistance,
m
A & mA : 0.4A/1KV, IR 30kA, F Fuse, or better
A : 11A/1KV, IR 20kA, F Fuse or better
V : 1100Vrms
mV,
W
& Others : 1000 Vrms
E.M.C. :
Meets EN61326-1:2013
In an RF field of 3V/m:
Total Accuracy = Specified Ac 25 digits.
Performance above 3V/m is not specified.
Transient Protection :
8KV(1.2/50
m
S Surge)
ACCESSORIES :
ACCESSORIES :
BKB32 banana plug to type-K socket plug adaptor,
Test probe pair, BRP21S2-C Remote probe, Alligator clip pair, Holster, Bkp60 banana plug type-K thermocouple & User manual.
OPTIONAL
Magnetic hanger, & BMP-86x Carrying Case.
