Kubota G23, Workshop Manual

Page: 33 / 343

GENERAL
G23, G26, WSM
G-15 (EU)
IMPORTANT
• The jobs indicated by
+
must be done initially.
• *1 : This maintenance should be done daily more often in dusty condition than in normal conditions.
Suggested cleaning interval is every 100 hours in normal conditions.
*2 : Replace only if necessary.
*3 : Initial elongation of the front PTO belt may occur prior to 25 hours.
Adjust the tension spring length as needed to maintain belt tension.
• The items listed above (@ marked) are registered as emission related critical parts by KUBOTA in the
U.S.EPA nonroad emission regulation. As the engine owner, you are responsible for the performance of
the required maintenance on the engine according to the above instruction.
Please see the Warranty Statement in detail.
9Y1210294GEG0004US0
24 Injection pump Check
every
3000 Hr
G-45 @
25 Radiator Clean
every 2
years
G-47
26 Coolant Change
every 2
years
G-47
27 Anti-Freeze –
every 2
years
G-47
28 Mower gear box oil seal Replace
every 2
years
G-46
29 Fuel system Bleed
Service
as Re-
quired
G-49
30 Fuse Replace G-50
31 Blade Replace G-51
32 Light Bulb Replace G-52
No. Item
Indication on hour meter
After
since
Refer-
ence
page
Impor-
tant
50 100 150 200 250 300 350 400 450 500 550 600
KiSC issued 08, 2009 A