Dodge 2008 Avenger Owner'S Manual Download Page 99

Page: 99 / 467

from which you choose. To select one of the entries
from the list, press the “Voice Recognition” button
while the UConnect

system is playing the desired

entry and say

Delete.

•

After you enter the name, the UConnect

system will

ask you which designation you wish to delete: home,
work, mobile, pager, or all. Say the designation you
wish to delete.

•

Note that only the phonebook entry in the current
language is deleted.

Delete All Entries in the UConnect

Phonebook

•

Press the PHONE button to begin.

•

After the

Ready

prompt and the following beep, say

Phonebook Erase All.

•

The UConnect

system will ask you to verify that you

wish to delete all the entries from the phonebook.

•

After confirmation, the phonebook entries will be
deleted.

•

Note that only the phonebook in the current language
is deleted.

List All Names in the UConnect

Phonebook

•

Press the PHONE button to begin.

•

After the

Ready

prompt and the following beep, say

Phonebook List Names.

•

The UConnect

system will play the names of all the

phonebook entries.

•

To call one of the names in the list, press the “Voice
Recognition” button during the playing of the desired
name, and say

Call.

NOTE:

The user can also exercise

Edit

Delete

operations at this point.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Summary of Contents for 2008 Avenger




















































































































































































































































































































































































































































































Search results

Summary of Contents for 2008 Avenger

Reviews:

Related manuals for 2008 Avenger

Brands by name

Popular brands

Dodge 2008 Avenger, Owner'S Manual

Search results

Summary of Contents for 2008 Avenger

Reviews:

Related manuals for 2008 Avenger

Brands by name

Popular brands