![background image](http://html.mh-extra.com/html/abb/fena-01/fena-01_user-manual_186370.webp)
370 Appendix A – PROFIdrive parameters and I&M records of PROFINET IO
1000
R/W
Unsigned16
Map 16-bit selection
3)
. Used to request
the data type for mapped parameters if
mapping is done with parameter 915 or
916.
Value
Description
1
Use 16-bit mapping, if
available.
50000
R/W
Unsigned16
Disable alarms.
Value
Description
0
PNIO alarms enabled.
1
PNIO alarms disabled.
61000
R
VisibleString24 Name of station
61001
R
Unsigned32
IP of station
61002
R
Array [6]
Unsigned8
MAC of station
61003
R
Unsigned32
Default gateway of station
61004
R
Unsigned32
Subnet mask of station
1)
Read and/or Write
2)
The meaning of vendor-specific bits is defined by the drive control
program.
3)
Support depends on the drive type.
Par. no. R/W
1)
Data type
Description
Summary of Contents for FENA-01
