![background image](http://html.mh-extra.com/html/abb/fena-01/fena-01_user-manual_186234.webp)
234 EtherNet/IP – Communication protocol
Attribute explanations
Interface Status attribute (#1) bits
5
Interface
Configuration
Get
STRUCT
of:
IP Address
IP Address
UDINT
Network Mask
Network Mask
UDINT
Gateway
Address
Gateway Address
UDINT
Unused
UDINT
Unused
UDINT
Default Domain
Name
Default Domain Name for
unqualified host names.
STRING
6
Host Name
Get
Host name
STRING
Bit
Name
Description
0…3
Interface
configuration
status
Indicates the status of the Interface Configuration
attribute.
Value Description
0
The Interface Configuration attribute has
not been configured.
1
The Interface Configuration attribute
contains valid configuration obtained
from BOOTP, DHCP or non-volatile
storage.
2
The IP address member of the Interface
Configuration attribute contains valid
configuration obtained from hardware
settings (eg, pushwheel, thumbwheel).
3…15 Reserved
#
Attribute name Services
Description
Data
type
Summary of Contents for FENA-01
