![background image](http://html.mh-extra.com/html/abb/fena-01/fena-01_user-manual_186337.webp)
PROFINET IO – Communication protocol 337
16h
Parameter address
impermissible
Illegal value or value that is not
supported for the attribute, number
of elements, parameter number or
sub-index, or a combination
17h
Illegal format
Write request: Illegal format or
format of parameter data that is not
supported
18h
Number of values
inconsistent
Write request: Number of values of
the parameter data does not match
the number of elements at the
parameter address.
65h…FF Manufacturer-specific
error area
–
65h
Vendor-specific error
Vendor-specific error
66h
Request not supported
Request not supported
67h
Communication error
Request cannot be completed
because of a communication error.
6Eh
Non-volatile error
Failure during write to non-volatile
memory
6Fh
Time-out error
Request aborted because of a
timeout.
78h
PZD map failure
Parameter cannot be mapped to
PZD (size mismatch or non-
existent).
79h
PZD memory failure
Parameter cannot be mapped to
PZD (out of memory).
7Ah
Multiple PZD map
Parameter cannot be mapped to
PZD (multiple PZD write).
82h
Control word bit map
Cannot map Control word bit
(parameter 933…937, eg, double
mapping of bits).
8Ch
Set torque mode error
Cannot change mode to TORQUE
(frequency is used).
90h
Illegal Request ID
The request ID of the response is
illegal.
Error #
Meaning
Used at
Summary of Contents for FENA-01
