![background image](http://html.mh-extra.com/html/abb/fena-01/fena-01_user-manual_186061.webp)
Modbus/TCP – Start-up 61
FENA-01/-11/-21 configuration parameters – group C (group 3)
Note:
The actual parameter group number depends on the drive
type. Group C (group 3) corresponds to:
•
parameter group 54 in ACS355
•
parameter group 52 in ACSM1, ACS850 and ACQ810
•
parameter group 52 in ACS880 and ACS580 if the adapter is
installed as fieldbus adapter A or group 55 if the adapter is
installed as fieldbus adapter B.
No.
1)
Name/Value
Description
Default
01
DATA IN 1
(drive to client)
Selects the drive parameter address from
which the data is read to the DATA IN 1
register (from the server to the client). The
Modbus register address maps are explained
in chapter
Modbus/TCP – Communication
protocol
.
The content is defined by a decimal number in
the range of 0 to 9999 as follows:
0
= None
ACS355:
FBA DATA IN 1
ACSM1:
FBA DATA IN1
ACS850/ACQ810:
FBA data in1
ACS880/ACS580:
FBA A/B data in1
0
= None
Not used
101…9999
Parameter index with format
xxyy
, where
•
xx
is the parameter group number (1…99)
•
yy
is the parameter number index within
that group (01…99).
Note:
In ACS880 and ACS580, choose
Other
to display a list of mappable drive parameters.
02…
12
DATA IN 2 …
DATA IN 12
See parameter
01
DATA IN 1
.
0
= None
1)
The number of parameters in this group may vary by drive type and drive firmware.
0
Not used
1…99 Virtual address area of drive
control. Not used when the
Modbus/TCP protocol is used.
101…
9999
Parameter area of the drive
Summary of Contents for FENA-01
