![background image](http://html.mh-extra.com/html/abb/fena-01/fena-01_user-manual_186250.webp)
250 PROFINET IO – Start-up
03
COMM RATE
Sets the bit rate for the Ethernet interface.
0
= Auto
ACS355:
FB PAR 3
ACSM1:
FBA PAR3
ACS850/ACQ810:
FBA par3
ACS880/ACS580
:
Commrate
0
= Auto
Autonegotiate
1
= 100 Mbps FD
100 Mbps, full duplex
2
= 100 Mbps HD
100 Mbps, half duplex
3
= 10 Mbps FD
10 Mbps, full duplex
4
= 10 Mbps HD
10 Mbps, half duplex
04
IP
CONFIGURATION
Sets the method for configuring the IP
address, subnet mask and gateway address
for the module.
In a PROFINET IO network, the master
controller has a Duplicate Address Detection
mechanism.
1
= Dyn
IP DHCP
ACS355:
FB PAR 4
ACSM1:
FBA PAR4
ACS850/ACQ810:
FBA par4
ACS880/ACS580:
IP configuration
0
= Static IP
Configuration will be obtained from
parameters
05
…
13
or from the PLC via DCP.
The DCP protocol allows the master controller
to find every PROFINET IO device on a
subnet. When the adapter module is
configured for the PROFINET IO protocol, the
IP address is transferred to the PROFINET IO
communication stack.
If there is a need to change the IP address
configured via DCP, it should be done with a
DCP tool, such as Siemens Step7. If some of
the other methods are used to change the IP
address, the module must be restarted to
enable any changes.
1
= Dyn IP DHCP
Configuration will be obtained via DHCP.
No.
Name/Value
Description
Default
Summary of Contents for FENA-01
