NewHank DU 22
Thank you for buying NewHank DU 22, this guide will take
you know how to use this product.
1.
Product Introduction
This product is applied to the audio system field to realize
the USB signal and Dante network audio signal conversion
function.
2. Product Feature
1.
Function Introduction: Support USB signal and Dante
network audio signal conversion
2.
Input & Output:2 channel
3. Technical Parameters
Model No.
NewHank DU 22
Product Type
Audio signal adapter
Function
The USB signal and Dante network
audio signal conversion
RJ45 Port
1
Connection
RJ45 and USB A type
Power supply
USB
Sampling rate
48kHz
Network transmission
Dante IP AES67 RTP audio
USB
Specification level USB 2.0 devices
Operating temperature
0-40
℃
Size (LxWxH)
652mm x 32mm x 22mm
Weight
0.2kg
4. Product Overview
5. Product Connect
Follow the below steps to set up a Dante network for
controlling.
1.
Download and install the Dante Controller from
Audinate website (www.audinate.com).
2.
Connect the device to the switch using Dante network
audio system with network cable
3.
The analog audio transmission device is connected
through the XLR interface
4.
Search for devices in Dante Controller software, Select
and open the devices to be configured
，
On the Routing
page, match the input row with the output column with
a custom check.
5.
Once set up and configured the audio routing between
audio device, the audio device will remember and save
the settings.
