224 EtherNet/IP – Communication protocol
AC/DC-drive object, class 2Ah
The AC/DC-drive object can only be used if the ODVA AC/DC drive
profile is in use.
The object models the functions specific to an AC or DC Drive.
Class attributes (Instance
#0)
14
Warning
Code
Get
Code word indicating the
warning present. If multiple
warnings are present, the
lowest code value is
displayed. DRIVECOMM
codes are reported. See the
drive manual for further
information on DRIVECOMM
codes.
UINT16
15
CtlFromNet
Get
0 = NetControl disabled
1 = NetControl enabled
BOOL
16
DNFaultMode Get, Set
2 = Vendor specified
UINT8
17
ForceFault
Get, Set
0
→
1 forces the drive to fault
BOOL
#
Attribute
name
Services
Description
Data
type
1
Revision
Get
Revision of the CIP Object
Class Definition upon which
the implementation is based
Array of
UINT8
#
Attribute
name
Services
Description
Data
type
Summary of Contents for FENA-01
